Universal Test Stands
Your All-in-One Solution
Our automated test stands are designed to streamline your testing process down to the push of a button. Using our proprietary software, our test stands automatically run your tests and compile the data into easily accessible reports.
We work closely with you to customize our test stands to fit your specific needs. No matter if you’re testing valves, pumps, motors, or any other hydraulic or pneumatic component, our test stands are guaranteed to give you a rapid return on investment.
Pressure Testing for Leak and Burst
Our test stands can perform a routine that includes the following:
- Ramp and Hold
- Pressure increases at a set rate and then holds at a set point for a specified amount time.
- Ramp to Burst
- Once a burst is detected by a drop in pressure, the test ends, the residual pressure is removed, and the part isolated.
- Leak Test
- This test is used in conjunction with a ramp hold. The pressure increases to a setpoint and the part is isolated with the automatic valves. The pressure is monitored during the set time period and the deviation recorded. If the deviation is outside of the limits, the test is aborted.
- Sinusoidal Pressure Cycling
- The part is subjected to a sinusoidal pressure with a trough, peak, and frequency setpoint.
- Square Wave Cycling
- Similar to Sinusoidal but the rise and fall to the setpoints is performed as fast as possible.
Flow Testing for Performance and Calibration
Flow testing rigs provide for controlled flow, independent of pressure and normally included thermal conditioning for both heat input and removal. Precise temperature control is most often a requirement for these tests.
Technics Assembly & Test’s systems is used in production operations for both validation and calibration of pressure control devices and metering systems.
Features
- Auto-programming capabilities store testing parameters for future tests to save you time and reduce errors.
- Digital HMIs and analog displays customized to control all functions of a test seamlessly.
- An integrated control box tests the response time of servo valves.
- Comprehensive safety features for both the operator and the test stand.
Technical Data
Minimum Pressure | 5 psi |
Maximum Pressure | 5000 psi (additional pump system can reach 7250 psi) |
Leakage Rate | 5 cc/min |
Temperature Control Range | +/- 20 degrees Fahrenheit |
Ramp Time | 2 seconds |